Siemens SINUMERIK 828D Function Manual page 62

Detailed description
2.5 Language elements for synchronized actions and technology cycles
Predefined subprograms: Miscellaneous
SETM
CLEARM
RET
GET
RELEASE
AXTOCHAN
AXCTSWEC
SETAL
IPOBRKA
ADISPOSA
Table 2- 7
Predefined subprograms: Coupling > Coupled motion
TRAILON
TRAILOF
1) Section: "Couplings (CP..., LEAD..., TRAIL..., CTAB...) (Page 105)"
Table 2- 8
Predefined subprograms: Couplings > Master value coupling
LEADON
LEADOF
1) Section: "Couplings (CP..., LEAD..., TRAIL..., CTAB...) (Page 105)"
Table 2- 9
Predefined subprograms: Couplings > Torque coupling (master/slave)
MASLON
MASLOF
MASLDEF
MASLDEL
MASLOFS
62
Set marker of the channel coordination
Section: "Channel synchronization (SETM, CLEARM) (Page 117)"
Delete marker of the channel coordination
Section: "Channel synchronization (SETM, CLEARM) (Page 117)"
Subprogram return
Request axis
Section: "Axis replacement (GET, RELEASE, AXTOCHAN) (Page 92)"
Release axis
Section: "Axis replacement (GET, RELEASE, AXTOCHAN) (Page 92)"
Transfer axis to another channel
Section: "Axis replacement (GET, RELEASE, AXTOCHAN) (Page 92)"
Withdrawing axis container rotation enable
Section: "Withdrawing the enable for the axis container rotation
(AXCTSWEC) (Page 100)"
Display user-specific alarm
Section: "User-specific error reactions (SETAL) (Page 118)"
Block change criterion: Deceleration ramp
Tolerance window for end-of-motion criterion
1)
Coupled motion on
Coupled motion off
Master value coupling on
Master value coupling off
Coupling on
Coupling off
Define coupling
Delete coupling
Coupling with slave spindle off
1)
Function Manual, 07/2012, 6FC5397-5BP40-3BA0
Synchronized actions