Mitsubishi Electric Q172CPU Programming Manual page 293

APPENDICES
No. Name
M9244 CPU No.1 error flag
M9245 CPU No.2 error flag
M9246 CPU No.3 error flag
M9247 CPU No.4 error flag
Table 3.1 Special relay list (continued)
Meaning
OFF : CPU No.1 normal • Turn off when the CPU No.1 is normal. (It contains at
ON : On CPU No.1 stop continuation error.)
error • Turn on during stop error of the CPU No.1.
OFF : CPU No.2 normal • Turn off when the CPU No.2 is normal. (It contains at
ON : On CPU No.2 stop continuation error.)
error • Turn on during stop error of the CPU No.2.
OFF : CPU No.3 normal • Turn off when the CPU No.3 is normal. (It contains at
ON : On CPU No.3 stop continuation error.)
error • Turn on during stop error of the CPU No.3.
OFF : CPU No.4 normal • Turn off when the CPU No.4 is normal. (It contains at
ON : On CPU No.4 stop continuation error.)
error • Turn on during stop error of the CPU No.4.
(Note-1): It adds newly at the Motion controller Q series.
(Note-2): The CPU No.1 is reset after the factor of the stop error is removed to cancel a stop error.
Details
APP - 48
Set by
(When set)
(Note-2)
(Note-2)
S(Change status)
(Note-2)
(Note-2)
Resetting is cancelled.
Remark
New
(Note-1)