Tll Device Logged Changes; Tll Messages - ABB 800xA Operation

Section 5 TLL Displays
Use the Step field to display the screen for a particular step of the sequencer. Use
the up/down arrow of the Step field to display the screen for the previous/next step
of the sequencer. Enter a step value to go to a particular step.
You can switch to a display for another sequencer in the device by selecting one
from the Sequencer field.
To change a value, select the value field for the Item to be changed, type in a valid
I/O point (no spaces), and then press ENTER. To delete a value, clear the field and
then press ENTER.

TLL Device Logged Changes

There are several changes that can be made to items on the Database Summary
Displays. Almost all of these changes are logged. For example, if your system is
configured with a logging printer, a typical message would be:
REG1

TLL Messages

TLL messages are treated like TCL messages and can be displayed on the TCL
Message Display for a unit. TLL messages are configured on the Ladder Logic
Message Templet as described in the TLL User's Guide. Units receiving TLL
messages during runtime are specified on the TLL Configuration Area Templets.
3BUR002418-600 A
SEQ1 MASK REGISTERAC CHANGED FROM 115 TO 315
TLL Device Logged Changes
119