Diagnostic Message Display - ABB 800xA Operation

Diagnostic Message Display

Diagnostic Message Display
If the system is configured with multiple connectivity pairs user will receive
duplicate diagnostic messages. The original diagnostic message and duplicate
messages if any can be acknowledged.
The Diagnostic Messages Display,
as a diagnostic failure by a device/subdevice of the MOD control system (both
system software and system hardware) along with an indication of the time,
frequency and type. A font selection allows you to display large, medium or small
fonts and consequently fewer or more lines in the main portion of the display.
Colors are assigned to each message type as defined below:
Color Indication
Figure 63. Diagnostic Message Display
140
Diagnostic Message Type
Red Fatal (F) and Error (E)
Yellow Warning (W)
Green Informational Status (S)
Figure 63, shows all messages reported and filed
Section 6 Status Displays
3BUR002418-600 A