Device Loops - ABB 800xA Operation

Device Loops

Device Loops
Figure 6
for device loops. Device loops detect the device state. There is no trend or alarm
limit/priority information on Loop Detail Displays for device loops. Select the
command, mode, and state process values box to access the device loop faceplate.
This display also provides the means to set the following device loop parameters.
•
•
Figure 6. Loop Detail Extended Faceplate for a Device Loop
36
is an example of the information that is included on a Loop Detail Display
Loop setup values, including: Phase, Scan Rate, Loop Mode, Simulation Mode,
Override Mode, and Lock State. Field State is a read only field and cannot be
changed.
Alarm configuration conditions, including Alarm Post, and Alarm Check.
Section 3 CCF Displays
3BUR002418-600 A