Flow Calculation Fcm - ABB 800xA Operation

Flow Calculation FCM

NEW HIGH RANGE Field
This field specifies high range value of the result. Valid entry is any number.
Flow Calculation FCM
This FCM calculates mass and volume flow rates for liquids and gases. Its primary
input is either a differential pressure measurement or a velocity measurement.
STANDARD TEMP Field
This field specifies the standard temperature. Temperature must be absolute
(degrees Rankine). Valid entry is any number.
FLOWING TEMP Field
This field specifies the flow temperature. It is used when TEMP LOC/REM is
LOCAL. The temperature must be absolute (deg. Rankine where deg. Rankine =
deg. Fahrenheit + 459.69). Valid entry is any number greater than 0.
FLOWING PRESSURE Field
This field specifies the flow pressure. It is used when PRES LOC/REM is LOCAL.
Valid entry is any number greater than 0. The entry must be in PSIA.
FLOWING DENSITY Field
This field specifies the flow density. It is used when DEN LOC/REM is LOCAL.
Valid entry is any number greater than 0.
DENSITY SC Field
This field specifies the value for the density at standard conditions. Valid entry is
any number.
SPEC GRAV SC Field
This field specifies the value for specific gravity at standard conditions. Valid entry
is any number.
262
Appendix A Runtime Templates
3BUR002418-600 A