Force Sensor Set 4F-Fs001-W1000 - Mitsubishi Electric 4F-FS001-W200 Instruction Manual

Force Sensor Set 4F-FS001-W1000

4.1.2
The standard configuration of this product is as follows. Please check.
Table 4-2: Force sensor set (4F-FS001-W1000) product configuration list
No. Part Name
<1> Force sensor (*1)
<2> Force sense interface unit
<3> Adapter cable
<4> 24 VDC power supply
24 VDC power supply
<5>
output cable (1 m)
24 VDC power supply input
<6>
cable (1 m)
Serial cable between unit
<7>
and sensor (5 m)
SSCNET III cable (10 m)
<8>
<9> CD-ROM
Spare fuse
<10>
*1: The sensor attachment adapter is not supplied. You should purchase the sensor attachment adaptor
separately. (See Table 4-3)
Note) The numbers in the above table correspond to the numbers below.
<1> Force sensor
(1F-FS001-W1000)
<4> 24 VDC power supply
<7> Serial cable between unit
and sensor (5 m)
<10> Spare fuse
Model
4F-FS001-W1000 1F-FS001-W1000
(force sensor set)
2F-TZ561
1F-ADCBL-01
2F-PWR-01
2F-PWRCBL-01
2F-PWRCBL-02
2F-FSCBL1-05
MR-J3BUS10M
BFP-A8946
LM03
<2> Force sense interface unit
<5> 24 VDC power supply
output cable
<8> SSCNET III cable (10 m)
4 Check Before Use
Quantity Remarks
1
1
1
1
1
1
1
1
1
1
<3> Adapter cable
<6> 24 VDC power supply
input cable
<9> CD-ROM
・Instruction Manual
・Sample Program
Product Check 4-23