50 Disassembly and assembly
Removal and installation of
radiator assembly
Removal
1.
Turn the upper structure by 90 degrees.
2.
Remove cover (1).
3.
Drain the engine cooling water.
6
Coolant:
4.
Open up the engine hood.
5.
Disconnect reservoir tank hose (2).
6.
Remove cover (3).
PC210, 230, 240-8
Approx. 21l (PC210, 230)
Approx. 20.4l (PC240)
7.
Remove hose and tube assembly (4). [*1]
a Remove it without separating from the
bracket.
a MIKALOR clamp
a Mark the hose edge and tube to show the
original hose installation positions. (See
figure below.)
a Inserted air hose length
A: 80 mm
q
B: 65 mm
q
UEN00660-00
29