Table of Contents
Advertisement
50 Disassembly and assembly
Removal and installation of
hydraulic tank assembly
k
Lower the work equipment to the ground
completely, after the engine is stopped,
loosen the hydraulic tank cap gradually to
reduce the pressure inside, and set the
lock lever in the lock position.
Removal
a Attach an identification tag to each piping to
avoid a mistake in the position of installation
later.
1.
Swing to right 45 degree. (For hydraulic tank
oil drain)
2.
Remove cover (1).
3.
Drain hydraulic tank oil. [*1]
6
Hydraulic tank:
4.
See Removal and installation of engine and oil
pressure pump assembly to remove flame (2)
between hydraulic tank and engine. For that
purpose, remove below mainly.
Engine hood
q
Control valve upper cover
q
Cover between hydraulic pump and en-
q
gine
Air cleaner upper cover
q
PC210, 230, 240-8
Approx. 234l (PC210, 230)
Approx. 239l (PC240)
5.
Shift cover (3) forward.
a Keep away from bolt B.
6.
Remove cover (4) and (5).
UEN00663-02
5
Advertisement
Table of Contents
Troubleshooting
