Disassembly And Assembly Of Idler Assembly; Installer T - Komatsu PC210-8 Shop Manual

50 Disassembly and assembly
Disassembly and assembly of
idler assembly
Special tools
Part number
L 3 791-530-1510 Installer
Disassembly
Structural illustration
q
1. Remove the dowel pin (1) to dismount the sup-
port (2).
2. Remove the floating seal (3) from the support
(2) and idler (4).
PC210, 230, 240-8
Part name
t
1
3. Detach idler the (4) from shaft (5) and support
assembly (7).
a Since 250cc of oil is filled in, drain it at this
timing, or underlay some cloth to prevent
any careless smearing.
4. Remove floating seal (6) on the opposite side
from idler (4), shaft (5) and support assembly
(7).
5. Remove dowel pin (8) to detach support (7)
from shaft (5).
6. Remove bushings (9) and (10) from idler (4).
UEN00662-00
7