Huawei IDS1000 User Manual page 13

IDS1000 Container Data Center
User Manual
Component Name
VESDA
VESDA power box
Gas extinguishing
equipment
Fire extinguishing
pipe
Atomizer nozzle
Gas release indicator
Audible and visual
alarm
Emergency start/abort
switch
Heat detector
Smoke detector
Alarm bell
 For details about how to configure the container data center fire extinguishing system, see
the corresponding descriptions in the Container Data Center Initial Configuration Guide.
 A VESDA is optional in the fire extinguishing system. If it is not configured in the
practical solution, ignore the relevant VESDA descriptions in this document.

A gas extinguisher is an auxiliary device in the fire extinguishing system. If it is not
configured in the practical solution, ignore the relevant gas extinguishing equipment
descriptions in this document.
Issue 01 (2014-3-15)
Configuration Principle
Determine the model and quantity of VESDAs based on the size
of the protected zone.
Determine the quantity of VESDA power boxes based on the
quantity of VESDAs. Each VESDA is configured with one power
box.
Determine the quantity of gas extinguishing equipment based on
the size of the protected zone.
After ensuring that extinguishing agents can be transported to the
entire protected zone swiftly and evenly, deploy the pipes flexibly
based on the layout of the protected zone.
Installed on fire extinguishing pipes based on the size of the
protected zone.
Configured at the entrance or exit of the protected zone (one to
two in general).
Configured based on the size of the protected zone (one to two in
general).
Configured at the entrance or exit of the protected zone (one in
general).
Configured in couple with a smoke detector based on the size of
the protected zone.
Configured in couple with a heat detector based on the size of the
protected zone.
Configured based on the size of the protected zone (one to two in
general).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Configuration Description
7