Align Plane; General Information - Siemens SINUMERIK 840D sl Programming Manual

4.2.6

Align plane

4.2.6.1

General information

Prerequisite
The workpiece probe is the active tool with activated tool offsets in the spindle and is already
calibrated (refer to "Calibrating workpiece probe" chapter).
Selection display
After selection of "orient plane", the following selection display is shown:
Note
Set the feedrate override to the same value as for calibration!
Measuring cycles
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
Measuring in JOG
4.2 Workpiece measurement
4-33