Step 6 - Set Measuring Cycle Data - Siemens SINUMERIK 840D sl Programming Manual

Measuring cycles

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Start-up (hardware)

10.4 Commissioning measuring cycles for HMI-Advanced PCU50 powerline as of SW 06.03.19. and/or

SW 06.04.10 and HMI-Advanced PCU50 Solutionline

Step 6 – set measuring cycle data

• Check default values of the GUD variables and set other values, if necessary.

• That is done by selecting and changing the variables in "Parameters", "User data" ... or

• Data description (see Section 9.2 "Cycle data", Section 9.3 "Data for measuring in JOG"

using a program (see Section 9.3).

and up-to-date information in SIEMENSD.TXT / SIEMENSE.TXT included with the

software delivered).

Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0

Measuring cycles