Measuring Cycle Help Programs; Measuring Cycle Subroutines; Overview - Siemens SINUMERIK 840D sl Programming Manual

Measuring cycle help programs

3.1

Measuring cycle subroutines

3.1
3.1.1

Overview

General information
The measuring cycle subroutines are called directly by the cycles. With the exception of
CYCLE100, CYCLE101, and CYCLE116, these subroutines cannot be executed by a direct
call.
Programming
Cycle Function
CYCLE100 Activate logging
CYCLE101 Deactivate logging
CYCLE102 Measuring result display
CYCLE103 Parameter setting in interactive mode
CYCLE104 Internal subroutine:
CYCLE105 Internal subroutine:
CYCLE106 Internal subroutine:
CYCLE107 Output of measuring cycle messages
CYCLE108 Output of measuring cycle alarms
CYCLE109 Internal subroutine:
CYCLE110 Internal subroutine:
CYCLE111 Internal subroutine:
CYCLE112 Internal subroutine:
CYCLE113 Internal subroutine:
CYCLE114 Internal subroutine:
Internal subroutine:
CYCLE115 Internal subroutine:
CYCLE116 Calculation of center point and radius of a circle
CYCLE117 Internal subroutine:
CYCLE118 Internal subroutine:
CYCLE119 Internal subroutine:
Measuring cycles
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
Measuring cycle interface
Log
Log
Data transfer
Plausibility checks
Measuring functions
Measuring functions
Log
Load ZO memory, load tool offset
Load tool offset
Load ZO memory
Pre-positioning
Log
Arithmetic cycle for determining
position in space
Note
only up to measuring cycles – SW 4.5
only up to measuring cycles – SW 6.2
only up to measuring cycles – SW 6.2
from meas. cycles - SW 6.3
3
3-1