Siemens LMV5 Series Technical Instructions page 13

LMV Series
Pre-built valve actuator assemblies are available that mount an SQM45... or SQM48... actuator
to a VKF... gas butterfly valve. A variety of VKF... valves are available from 1-1/2" to 8". The
most common assemblies are listed below. For more information about VKF... valves, refer to
Document No. CVLV-1000. For more information about valve actuator assemblies using VKF...
valves, refer to Document No. VA-3000.
VA45.2-3.0VKF
VA45.2-4.0VKF
VA45.2-6.0VKF
Valve Actuator Assemblies – Qty (1) Required if Firing Oil (Not Using a Cleaver Brooks Oil Valve)
Pre-built valve actuator assemblies are available to mount an SQM45... or SQM48... actuator to
a Hauck S, AS, B, F, G, or K series oil valve. For more information about valve actuator
assemblies using Hauck oil valves, refer to Document No. VA-4000.
VA...
When retrofitting a Cleaver Brooks boiler, the following kits are available for the oil metering
valve. Refer to Document No. CPBK-5000 for technical information or Document No. CPBK-
5100 for installation instructions.
BR-48CBOIL
BR-45CBOIL
SCC Inc.
Gas Firing Rate Control Valve (continued)
SQM45 to 3" VKF butterfly valve
SQM45 to 4" VKF butterfly valve
SQM45 to 6" VKF butterfly valve
Oil Firing Rate Control Valve
Valve actuator assemblies mounting an SQM45... or
SQM48... actuator to a Hauck oil valve
Cleaver Brooks Oil Valve Retrofit Kit - Optional
Bracket for mounting an SQM48... actuator to a
Cleaver Brooks oil metering valve
Bracket for mounting an SQM45... actuator to a
Cleaver Brooks oil metering valve
Page 9
HOME
Technical Instructions
Document No. LV5-1000
Section 1