Siemens LMV5 Series Technical Instructions page 7

LMV Series
Each LMV5 must be equipped with one AZL52.40B1 display. See page 25 for mounting
information and panel cutout dimensions.
AZL52.40B1
Each LMV5 must be equipped with a cable to connect the AZL52 display to the LMV5.
AGG5.635
The terminal plug sets for the LMV5 are sold separately. Each LMV5 needs one base plug set.
Additional plug sets are available (see "Control Panel Spare Parts").
AGG5.720
AGG5.7COMPLETE
A strain relief is required to ground the CANbus shield to the LMV5.
AGG5.110
SCC Inc.
Control Panel Components (continued)
Display – Qty (1) Required
Display with Modbus port, PC port, backlight, six
languages available
Display Cable – Qty (1) Required
Pre-made 9 foot cable for connecting the AZL52
display to the LMV5
Base Plug Set – Qty (1) Required
Plug set containing all terminals for a typical LMV5
system. Will accommodate a system with O
three actuators, one transformer, and no fuel meters
Plug set containing all terminals necessary for a
maximum LMV5 system. Will accommodate a
system with a VFD, O
transformers, and two fuel meters
Strain Relief – Qty (1) Required
Strain relief and actuator CANbus grounding
Page 3
HOME
Technical Instructions
Document No. LV5-1000
2
trim, six actuators, two
2
trim,
Section 1