Replacing The Controller - Bosch Rexroth IndraDrive Series Applications Manual

104/149 Bosch Rexroth AG
Notes on troubleshooting
9.5.5

Replacing the controller

Overview
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Rexroth IndraDrive Integrated Safety Technology "Safe Torque Off" (as of MPx-16)
Instructions
1. Loosen the mounting screws for the control section, optional card or
blank cover.
①②③ Mounting screws: ① CSx02.5 control section, ②
HPC01.1-MN02, ③ HPC01.1-P001
Fig. 9-2: HMU05 with control section (CSx02.5) and optional card
(HPC01)
2. Carefully remove the control section or optional card from the slot.
3. Installation is the reverse of removal.
A controller of the IndraDrive range consists of the components power
section, control section and programming module / control panel (incl.
firmware). The control section can be configured with additional components
DOK-INDRV*-SI3-**VRS**-AP06-EN-P