Huawei OceanStor N8500 T Series Installation Manual page 235

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Figure 7-39 Indicators on the Ethernet switch
Table 7-5 Checklist of indicators on the Ethernet switch
No.
1
2
3
4
Checking Indicators on a Fibre Channel Switch
Figure 7-40
Issue 02 (2015-09-22)
Indicator Name Description
Power indicator l Green on: The switch is powered on.
l Orange on: The power supply unit is faulty, and the external
l Off: The switch is powered off.
RPS indicator l Green on: The RPS is connected to the switch.
l Off: The RPS is not connected to the switch or the RPS is
System status l Green on: The system is not operating properly or is starting.
indicator
l Green blinking: The system is operating properly.
l Orange on: The system is performing self-check during
l Red on: After registering, the system does not operate
l Off: The system is not operating.
Mode indicator l Green on: The service interface indicator indicates the
l Red on: The service interface indicator indicates the stack
l Off: The service interface indicator is in the default mode
shows indicators on a Fibre Channel switch.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 N8500 Installation (with S5600T, S5800T or S6800T
RPS system is started.
faulty.
startup.
properly, or a power alarm, fan alarm, or temperature alarm
is generated.
interface speed. After 45 seconds, the service interface
indicator automatically restores to off.
ID. After 45 seconds, the service interface indicator
automatically restores to off.
(STAT).
Storage System as the Storage Unit)
226