Affixing A Label - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Step 2 Repeat
Step 3 Check the filler panel to ensure that it has been properly installed.
----End

5.14 Affixing a Label

This section explains how to attach a label for a signal cable and for a power cable.
Affixing a Label to a Signal Cable
The label attaching position on a signal cable is 2 cm (0.788 inch) away from the connector. In
special cases, for example, to avoid bending the cable or affecting other cables, attach the label
to a different position on the cable.
A label should be affixed to each end of a cable. When the cable is placed vertically, the label
should point rightwards. When the cable is placed horizontally, the label should point
downwards.
Figure 5-15 Affixing a label to a signal cable in a proper position
Figure 5-16
Issue 02 (2015-09-22)
Step 1 for other filler panels.
Figure 5-15 shows how to attach a label to the signal cable in a proper position.
TO:
1 A 01 2 A 06
shows how to attach a label to a signal cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 N8500 Installation (with the S2600T Storage System as the
Storage Unit)
59