Fiber Bundling - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
l
l
l

13.2.2 Fiber Bundling

This section describes the method of and requirements on fiber bundling.
l
l
l
Issue 02 (2015-09-22)
For fibers outside the cabinet, the corrugated pipe is required, which should be extended
into the cabinet about 10 cm.
Fibers under the protection of the corrugated pipe can go through the inter-layer (the space
between the cement floor and the ESD-preventive floor) of the floor or the cabling trough
in the equipment room installed with supports and ESD-preventive floor.
If the fibers are led out from the top of the cabinet, a cabling frame should be built over the
cabinet for cabling. In the case that the distance between the cabling frame and the cabinet
top is more than 0.8 m, a cable ladder should be used.
Fiber straps are usually used to bundle fibers.
Fibers should be bundled tidily and neatly with a nice appearance.
Fibers should be arranged smoothly. Crossovers should be avoided.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 Basic Cable Routing and Bundling Technology
308