How To Resolve The Problem Where Initiators That Do Not Belong To The Current Cluster; The Deployment Start Phase - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
16.1 How to Resolve The Problem Where Initiators
that do not belong to the current cluster
exist in the owing host group of initiators
of the current cluster Is Displayed During The
Deployment Start Phase
Symptom
Initiators that do not belong to the current cluster exist in
the owing host group of initiators of the current cluster is
displayed on the Step 6-6: Start Deployment page during the initial configuration of the N8500
clustered NAS engine.
Possible Causes
Initiators that do not belong to the current cluster are added to the host group.
Procedure
Step 1 Log in to the ISM by using the management IP address of the N8500, click Clustered Nodes,
and record all HBA Info of each clustered node.
Issue 02 (2015-09-22) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16 Troubleshooting
331