Usage Of Labels - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
The dividing lines on the label makes the position of a cable clearer. For example, there is a
dividing line between the cabinet number and the shelf number, and a dividing line between the
shelf number and the slot number. The size of the dividing line is 1.5 mm x 0.6 mm, and its color
is PANTONE 656c (light blue).
The dotted lines mark the position for folding the label when you affix it to the cable.
There is a mark "TO:" (upside down in the figure) at the lower right corner of the label. After
the mark, information about the peer end of the cable, to which the label is affixed, is to be
written.
Label for the Power Cable
The label for a power cable is attached to the identification plate on a cable tie. The size of the
bulge around the identification plate is 0.2 mm x 0.6 mm (symmetric on both sides), as shown
in Figure
Figure 15-2 Label for a power cable
12.2
0.6

15.2 Usage of Labels

This section describes how to use the labels, the contents on the labels, and the precautions for
using the labels.
Issue 02 (2015-09-22)
15-2.
26.2
Cable tie
100
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
R1.0
TO
11
:
25
Label paper
1.5
0.6
Dividing line on the label
Unit: mm
15 Cable Labels
325