Installing Adjustable Guide Rails For A Fibre Channel Switch - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Step 2 Place the floating nut mounting bar on the top of the floating nut and pull it into the hole until
it snaps into place, as shown in step 2 of
Step 3 Check the floating nut to ensure that it has been properly seated. as shown in step 3 of
5-8.
Step 4 Slide the SUD into the cabinet, as shown in step 1 of
Step 5 Use M6 screws to secure the SUD into the cabinet, as shown in step 2 of
Figure 5-9 Securing the SUD into the cabinet
Step 6 Check the SUD to ensure that it has been properly installed and secured.
Step 7 If multiple SUDs are required, repeat
----End
5.9 Installing Adjustable Guide Rails for a Fibre Channel
Switch
Before assembling a Fibre Channel switch, you must install adjustable guide rails to bear it. With
the adjustable guide rails, a Fibre Channel switch can be placed into different depths of cabinets.
Prerequisites
The following tools and materials have been ready:
l
Issue 02 (2015-09-22)
Phillips screwdriver (M3 to M6)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 N8500 Installation (with the S2600T Storage System as the
Figure 5-8.
Figure
Step 1 to Step 6 for other SUDs.
Storage Unit)
5-9.
Figure 5-9.
Figure
51