ISSUE 1.0
5.4.2 Connecting the Doorphone
The Doorphone configuration shall be assigned by system programming.
rd
The 3
party Doorphone Boxes can not be connected to the port.
5.4.3 Doorphone Interface Specifications
Item
Output Impedance
Output Level
Maximum Output
Hardware Manual
Modular cable
(2-wire, Straight)
Figure 2-123 Connecting the Doorphone
Table 2-21 Doorphone Interface Specifications
600 Ω
Nominal 250 mV (-10 dBm)
400 mV RMS
Wire position for each port
T
R
ST6 or ST7
T
R
Door phone
Specification
SL1000
Port position
ST7
ST6
2-77