Figure 2-99 Removing The Cpu Card; Figure 2-100 Installing The Pz-Vm21 Pcb - NEC SL1000 Hardware Manual

ISSUE 1.0
4. Push A-part in following figure to release the CPU support. Remove the CPU card.
5. Install the PZ-VM21 daughter board to J6 connector using four Nylon-spacers on the CPU card.
Nylon-spacers
PZ-VM21 PCB
Hardware Manual
CPU support
A
408M-A1 at 1632M KSU

Figure 2-99 Removing the CPU Card

CN1

Figure 2-100 Installing the PZ-VM21 PCB

CPU card
CPU card
J6
Nylon-spacers
SL1000
2-65