Figure 3-13 Inserting The Cf Card; Figure 3-14 Prg90-04 Display; Figure 3-15 Next Prg Display - NEC SL1000 Hardware Manual

SL1000
1. Turn the power off, insert the Customer Data CF card to the CF Slot on PZ-VM21.
CF card
2. Turn the power on, enter to the PRG90-04 at the Programming Mode.
3. Dial 1 and press Hold Key.
4. When the data backup to the CF card is completed, the display will be changed to the next PRG.
5. Remove the CF card and exit from the Programming Mode.
3-6

Figure 3-13 Inserting the CF Card

Figure 3-14 PRG90-04 Display

Figure 3-15 Next PRG Display

CPU card
CF Slot (CN2)
PZ-VM21 PCB
System Start Up
ISSUE 1.0