ISSUE 1.0
3. Loosen two screws and pull out the Main-Cover by opening up two hooks.
Two screws
4. Push A-part and open up the CPU support.
5. Insert the EXIFB-C1 PCB to J1 connector on 408M-A1 at 1632M-A KSU.
6. Close down the CPU support and make sure the A-part must be locked.
7. Cut and remove the plastic filter pieces for EXP connectors.
Main-Cover
Hardware Manual
Main-Cover
Hooks
Figure 2-13 Removing the Main-Cover
CPU support
A
408M-A1 at 1632M KSU
Figure 2-14 EXIFB-C1 PCB Installation
Figure 2-15 Removing the Plastic Filter Pieces
EXIFB-C1 PCB
J1
Plastic filter pieces
SL1000
CPU support
2-9