ISSUE 1.0
• The Sub-Cover can be opened and hold as following figure.
5. Hook the KSU on the screw heads, and fasten two screws.
Screw head
Screw head
1.4 Installing the Expansion KSU(s)
1.4.1 General
The expansion KSU(s) is/are connected to the main KSU individually. The EXIFB-C1 card and the
MEMDB-C1 card must be installed to the main KSU (1632M-A). (Refer to
Memory Card (MEMDB-C1) on page 2-56
1.4.2 Unpacking (EXIFB-C1)
Unpack the EXIFB-C1 and check it against the following list. Inspect for physical damage.
Items
EXIFB-C1
Hardware Manual
Push to hold
Figure 2-9 Sub-Cover Open and Hold
Hook
Figure 2-10 Mounting the KSU
for MEMDB-C1 card)
Table 2-3 Unpacking the EXIFB-C1
List of Contents
EXIFB-C1 PCB
Open
Fasten screws
Installing the Expansion
1
SL1000
QTY
2-7