Mounting The 2Bridb Pcb; Figure 2-69 Plastic Filter Piece; Figure 2-70 Replacing The Main-Cover - NEC SL1000 Hardware Manual

SL1000
8. Cut and remove the plastic filter piece for each Expansion interface card.
Main-Cover
9. Replace the Main-cover and fasten two screws.
Main-Cover
Hooks

3.3.2 Mounting the 2BRIDB PCB

Select the switches on the 2BRIDB-C1 PCB before mounting it onto the 008E-
A1/000E-A1 PCB, refer to the
2-44
Plastic filter
piece

Figure 2-69 Plastic Filter Piece

Figure 2-70 Replacing the Main-cover

Switch Setting on page
EXP.1st PCB
EXP.2nd PCB
EXP.3rd PCB
Two screws
2-49.
ISSUE 1.0
Installation