Figure 2-71 Pkg Spacers Of 008E-A1/000E-A1; Figure 2-72 Additional Installing The 2Bridb-C1 - NEC SL1000 Hardware Manual

ISSUE 1.0
1. Cut and remove specified piece(s) of PKG spacer on the 008E-A1/000E-A1 PCB.
2. Insert two Nylon-spacers into the specified holes and use one Metal-spacer and fasten screw onto
the 2BRIDB-C1 PCB.
3. Mount the 2BRIDB-C1 PCB onto the 008E-A1/000E-A1 PCB using two Nylon-spacers and one
screw. (Refer to Figure 2-72 Additional Installing the 2BRIDB-C1 on this
4. Stick the 2BRI Label to the specified position on the 008E-A1/000E-A1 PCB.
J1
Nylon-Spacers
J3
008E-A1/000E-A1 PCB
The 2BRIDB-C1 can not be mounted on the 408M-A1/408E-A1/1PRIU-C1 PCB.
Hardware Manual
008E-A1
000E-A1

Figure 2-71 PKG Spacers of 008E-A1/000E-A1

Figure 2-72 Additional Installing the 2BRIDB-C1

PKG Spacer piece
PKG Spacer pieces
2BRIDB-C1 PCB
Screw
Metal-Spacer
Screw
SL1000
page)
2BRI Label
2-45