Figure 4-15 Removing The Sub-Cover; Figure 4-16 Removing The Main-Cover; Figure 4-17 Inserting The Cf Card - NEC SL1000 Hardware Manual

SL1000
2. Remove the Sub-Cover.
3. Loosen two screws and remove the Main-cover.
Two screws
4. Insert the CF card (with the new Main software loaded) to the CF slot on PZ-VM21 daughter
board. (PZ-VM21 should be temporary installed if the system does not have it.)
CF card
4-10
Sub-Cover
Tab

Figure 4-15 Removing the Sub-cover

Main-Cover
Hooks

Figure 4-16 Removing the Main-cover

Figure 4-17 Inserting the CF card

Tab
CPU card
CF Slot (CN2)
PZ-VM21 PCB
D2 (Red)
D1 (Blue)
D3 (Red)
D4 (Red)
D5 (Red)
ISSUE 1.0
Maintenance