Figure 2-94 Installing The Cpu Card; Figure 2-95 Removing The Plastic Filter Piece And Replacing The Main-Cover - NEC SL1000 Hardware Manual

SL1000
6. Insert the CPU card to the 408M-A1 mother board, and close the CPU Support to fix to the KSU.
7. Cut and remove the plastic filter piece for VoIP connector, then replace the Main-cover and fasten
two screws.
Main-Cover
Hooks

Figure 2-95 Removing the Plastic Filter Piece and Replacing the Main-Cover

8. Connect the VOIPDB-C1 to an Switching hub using an Ethernet Cable.
<Before the Cabling>
2-62
CPU card
408M-A1 at 1632M KSU

Figure 2-94 Installing the CPU Card

Plastic
filter piece
ISSUE 1.0
CPU support
Two screws
Installation