SL1000
2. Install four screws into the wall. The screw heads must be remained about 2.5 to 3.5 mm.
• Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the KSU.
• The screw diameter is 4 to 4.5 mm.
3. Push the center of the Sub-Cover and slide it.
4. Pull out the Sub-Cover by opening up the tabs.
2-6
285
180
285
Figure 2-6 Screw Positions
Figure 2-7 Sub-Cover Slide-out
Sub-Cover
Tab
Figure 2-8 Removing the Sub-Cover
2.5 - 3.5
Unit : mm
Sub-Cover
Tab
ISSUE 1.0
Installation