Siemens SINAMICS S120 Manual page 22

4 Configuration and project engineering
No. Action
In this example, the S7-300
station was assigned the
following configuration:
IP address:
192.168.0.1
Subnet mask:
255.255.255.0
Now acknowledge the entries
that you have made with "Assign
13.
IP Configuration", and close the
window with "Close".
Note:
The "Assign Name" button can
be used to assign a specific
name to a node/participant. The
"pn-io" default value is kept
unchanged for this particular
example.
The CU320-2 is assigned an IP
address in the following.
14. To do this, select the Control
Unit from the nodes/participants
that can be reached and press
"OK".
22
Remark
PROFIsafe SLS Override
Version 1.0, Entry ID: 81682475