Siemens SINAMICS S120 Manual page 25

No. Action
First insert a rack in the "HW
Config"
window.
Then please select the
F-CPU being used
and insert this. To do this
you can drag the corresponding
F-CPU and drop it into the rack
(profile rail).
In this example
the following F-CPU is used:
3.
"CPU 315F-2 PN/DP".
Once this has been done, then
the adjacent window is
displayed.
Here, please check that the IP
address of the CPU lies within
the address range of the PC/PG
interface, and press the "New"
button to create a new subnet
(PROFINET).
Press the "OK" button to create
4.
a new subnet.
Then select the subnet that has
5. been created and exit the mask
with "OK".
PROFIsafe SLS Override
Version 1.0, Entry ID: 81682475
4 Configuration and project engineering
Remark
25