Siemens SINAMICS S120 Manual page 35

Entering limit values for safely limited speed (sls) into a sinamics s120 via profisafe with profinet

Hide thumbs Also See for SINAMICS S120:

Table of Contents

No.

Action

In this application example, only

the upper (red) motor is used. As

a consequence, the lower (blue)

motor should be deleted from the

application.

To do this, right click on the

"SERVO_03" button, and press

the "Delete" button.

The drive has to be post-

configured in the next step.

Open the drive configuration by

double-clicking on the drive, in

this particular case

"SERVO_02".

Then press the "Configure DDS"

button.

PROFIsafe SLS Override

Version 1.0, Entry ID: 81682475

4 Configuration and project engineering

Remark

Table of Contents