4 Configuration and project engineering
No.
Action
The parameters must now be
copied. To do this please press
the "Copy parameters" button.
11.
Then click on the "Activate
settings" button.
You are subsequently prompted
to change the password. The
default password is "0". Change
12.
the password to "1".
Data is copied from RAM to
ROM when pressing the "Yes"
13.
button.
14.
Then go offline.
Now please carry out a power
15.
on reset of the drive.
Then go online again, load the
16.
project into the PG/PC and save
it.
46
Remark
POWER OFF/ON
PROFIsafe SLS Override
Version 1.0, Entry ID: 81682475