Siemens SINAMICS S120 Manual page 36

Entering limit values for safely limited speed (sls) into a sinamics s120 via profisafe with profinet

Hide thumbs Also See for SINAMICS S120:

Table of Contents

4 Configuration and project engineering

No.

Action

The extended setpoint channel is

used to specify the speed of the

drive. Therefore, enable the

"Extended setpoint channel"

function.

Complete your entries by

pressing "Next".

Note:

In the following, only those

screen forms are described in

which a change is required.

A signal for "Infeed in operation"

(p0864) must be configured.

Here, fixed binector 1 is used in

the example.

Note:

In a real application, fixed

binector 1 should not be used as

signal for the "Infeed in

operation" (p0864).

Remark

PROFIsafe SLS Override

Version 1.0, Entry ID: 81682475

Table of Contents