Settings Screen - Toro Reelmaster 7000-D Service Manual

Settings Screen

The settings screen (Fig 17) allows the operator or tech-
nician to customize the InfoCenter display, modify a vari-
ety of machine functions, and provides access to unlock
various protected menus and settings. To scroll through
the list of functions, view its current setting, and select
(highlight) the setting to be modified, press the Down
button (as indicated by the
screen).
To return to the previous screen, press the Menu/Back
button (as indicated by the
screen).
Units: Use the Left/Right button (as indicated
at the bottom of the screen) to select between
English units of measure. Allow the desired selection to
remain in view for five (5) seconds. The fault indicator
will illuminate and an operator
ue Saved in Permanent Memory) will
Center display to confirm that the change has been
recorded.
Language: Use the Left/Right button (as indicated by
the at the bottom of the screen) to select from numer-
ous language options. Allow the desired selection to re-
main in view for five (5) seconds. The fault indicator will
illuminate and an operator
Saved in Permanent Memory) will
Center display to confirm that the change has been
recorded.
Backlight: Press the Left/Right button (as indicated
by the at the bottom of the screen) then use the
Down button to decrease or the Left/Right button to in-
crease the InfoCenter Display brightness
by the − and the + at the bottom of the
Contrast: Press the Left/Right button (as indicated
by the at the bottom of the screen) then use the
Down button to decrease or the Left/Right button to in-
crease the InfoCenter Display contrast
the − and the + at the bottom of the
F B'Lap RPM: Use the Left/Right button (as indicated
by the at the bottom of the screen) to select the reel
speed used when backlapping the front reels. Choose
from five (5) preset reel speeds.
R B'Lap RPM: Use the Left/Right button (as indicated
by the at the bottom of the screen) to select the reel
speed used when backlapping the rear reels. Choose
from five (5) preset reel speeds.
Reelmaster 7000−D
at the bottom of the
at the bottom of the
by the
metric or
advisory #180 (New Val-
appear on the Info-
advisory #180 (New Value
appear on the Info-
(as indicated
screen).
(as indicated by
screen).
Page 6 − 17
SETTINGS SCREEN
Settings
Units:
1
Language:
Backlight:
4
3
Figure 17
1. Settings items
2. Left/Right button
Protected Menus: Authorized individuals can enter the
four (4) digit passcode (PIN) to reveal the following ser-
vice functions (see Faults Screen and Service Screen in
this chapter):
S Clear System Faults
S Service Timer Reset
S DPF Regeneration
S DPF Ash
Entering the correct PIN will also reveal and allow ad-
justment of various machine functions on the settings
screen if Protect Settings is set to ON (see Settings
Screen − Protect Settings).
Use the Down button and Left/Right button (as indicated
by the and the at the bottom of the screen) to en-
ter the four (4) digit passcode (PIN). Once the correct
PIN has been entered, press the down button (as indi-
cated by the at the bottom of the screen). PIN will ap-
pear in the upper right hand corner of the InfoCenter
display. The protected items will be visible as long as the
ignition switch remains ON.
To edit the passcode (PIN), enter the current PIN as pre-
viously described (PIN will appear in the upper right
hand corner). Select Protected Menus again and use
the Down button and Left/Right button (as indicated by
the and the at the bottom of the screen) to enter
a new four (4) digit PIN. Press the Down button to save
the change (as indicated by the
screen).
English
English
40%
2
3. Down button
4. Menu/Back button
at the bottom of the
Electrical System