Display In The Tia Portal - Siemens SIMATIC S7-1500 System Manual

7.4

Display in the TIA Portal

Project tree
In the project tree, STEP 7 creates the project tree for the SIMATIC Drive Controller . The
project tree contains all elements and editors of the project.
Table 7- 3
Note
If there is no entry for SINAMICS Integrated, check whether SINAMICS Startdrive is correctly
installed and whether the "Including SINAMICS Integrated" option is selected in the settings.
SIMATIC Drive Controller
System Manual, 11/2019, A5E46600094-AA
Structure of the project tree
7.4 Display in the TIA Portal
Under the "Drive Controller" group folder, you
will find both the CPU and SINAMICS Inte-
grated.
Under the "PLC" entry, you will find the de-
vice configuration and diagnostic options for
the CPU, for example. You configure, assign
parameters for and program the CPU with
STEP 7 Professional.
Under the "Integrated" entry, you will find the
device configuration and diagnostic options
for integrated automatic speed control, for
example. You configure and assign parame-
ters for the SINAMICS Integrated with
SINAMICS Startdrive.
Configuring
99