Siemens SIMATIC S7-1500 System Manual page 99

Configuring
7.3 Configuration procedure
Replacing a SIMATIC Drive Controller (CPU) with a modular SIMATIC S7-1500 CPU
For the device replacement, PROFIdrive Integrated is removed and SINAMICS Integrated
remains as a non-networked device in the project. You can connect SINAMICS Integrated to
a SIMATIC Drive Controller CPU again at a later time.
If you no longer need SINAMICS Integrated, manually delete it from the configuration.
Configurations at interface X142 are not applied.
Note
Device replacement with other CPU classes (for example ET 200SP CPUs or ET 200pro
CPUs) is not possible.
Replacing SINAMICS Integrated with SINAMICS S120 CU320-2 and vice versa
Device replacement is currently not supported
98
SIMATIC Drive Controller
System Manual, 11/2019, A5E46600094-AA