Sequence Program Control Function - Mitsubishi Electric MELSEC Q Series User Manual

14.7

Sequence Program Control Function

This function allows the C Controller module to control (change) the sequence program execution type of a
programmable controller CPU.
Use a bus interface function when creating a user program for the C Controller module.
Programmable controller CPU
Sequence program
Scan execution type
program
Standby type
program
(1) Functions
Functions used for the sequence program control function are indicated below.
Function name
QBF_ControlProgram
When using this function, use a high performance model QCPU as a programmable controller CPU.
284
Low speed execution
type program
Fixed scan execution
type program
Controls the execute type of the programmable controller CPU module.
Q24DHC-V Q24DHC-VG
C Controller module
/*Controls the execution type of the sequence program*/
ret=QBF_ControlProgram() ;
Function
Q24DHC-LS Q26DHC-LS
Q12DC-V