Q24Dhccpu-V/-Vg/-Ls And Q26Dhccpu-Ls - Mitsubishi Electric MELSEC Q Series User Manual

6.1.1

Q24DHCCPU-V/-VG/-LS and Q26DHCCPU-LS

(1) Initialization status
Initialization brings the Q24DHCCPU-V/-VG/-LS and Q26DHCCPU-LS into the following status:
(a) Default IP settingNote6.1
• The execution of the script file registered on the "/ROM" drive (standard ROM) is stopped.
• The IP address of the Q24DHCCPU-V/-VG/-LS and Q26DHCCPU-LS is set to the default.
Item
User Ethernet port CH1
User Ethernet port CH2
System Ethernet port S CH1
Script file
*1 : The items are not initialized by this function. For the method for initialization, consult the partner (operating system
vendor).
(b) Module initialization setting
Parameters are reset to the initial values.
Battery backup RAM data is cleared to 0.
"/ROM" drive (standard ROM) is formatted.
(All directories and files in the "/ROM" drive is deleted.)
The resolution is set to 1024 × 768 (XGA).
The keyboard is set to the OADG-compliant Japanese 106-key
keyboard (106JIS).
● For Q24DHCCPU-VG, the partner application will be deleted by performing the module initialization setting.
For information on how to reinstall it, refer to the manuals provided by the partner (application vendor), or consult the
partner (application vendor).
● Initialization deletes data in the Q24DHCCPU-V/-VG/-LS and Q26DHCCPU-LS.
Before you can perform the initialization, back up all necessary data, user programs and parameters.
Note6.1
Q24DHCCPU-LS Q26DHCCPU-LS
Not supported by Q24DHCCPU-LS and Q26DHCCPU-LS.
-V
192.168.3.3
No setting
No file
Description
Note6.1
CHAPTER 6 HARDWARE OPERATIONS
Description
Q24DHCCPU
-VG -LS
192.168.3.39
CPU module
Q24DHCCPU
-V -VG
 
Note6.1
Q26DHCCPU-LS
*1
No change
*1
No change
: Supported : Not supported
Q26DHCCPU-LS
-LS


63
6