Mitsubishi Electric MELSEC Q Series User Manual page 215

Remark
If the control CPU of the network module is the C Controller module, use Setting/monitoring tools for the C Controller module
to set parameters. If it is the programmable controller CPU, use GX Works2.
(4) Refresh range
Refresh is performed on the range set by refresh parameters and set in the network range assignment (network
configuration settings). For access by link refresh, specify internal user device(s) in the refresh range.
C Controller module
Internal User Device
Actual link
refresh range
Refresh
parameter
setting range
All the range of refresh parameters from the first to the last is set in initial setting. Clicking the "Default" button during refresh
parameter setting in Setting/monitoring tools for the C Controller module will restore the initial setting.
For operation methods of Setting/monitoring tools for the C Controller module, refer to the following.
 Setting/Monitoring Tools for the C Controller Module Version 4 Operating Manual
CHAPTER 13 FUNCTIONS ACCESSED VIA A NETWORK MODULE
Network module
Network Range Assignment
(Network Configuration Settings)
parameter
Station
Link refresh
No.1
(Empty)
Station
Link refresh
No.2
(Empty)
Station
Link refresh
No.3
Network Range Assignment
(Network Configuration Settings)
setting range
13
213