Mitsubishi Electric MELSEC Q Series User Manual page 144

Function
Refresh function
Refresh cycle setting
Data refresh function
Link refresh function
Security function
Access authority setting
function
Individual identification
function
File access restriction
function
Service setting function
Event history collection
function
Analog RBG port display
function
Battery less drive
142
Description
Sets the refresh cycle used by the C
Controller module.
Performs refreshing automatically
between the devices of the C Controller
module (X, Y, buffer memory) and the
data refresh memory.
Performs refreshing automatically
between the devices of the C Controller
module (B and W) and the link device of
the network module.
Restricts operations from Setting/
monitoring tools for the C Controller
module, Telnet function and FTP
function by setting (adding/deleting)
user(s) to the C Controller module.
Creates a user program operable only
with a certain C Controller module with
individual identification information, by
reading out individual identification
information of the C Controller module.
Restricts accesses to files and
operations by setting an attribute for
each file.
The status of services (enabling/
disabling services) to be operated on
the C Controller module can be set.
Registers the history of up to 500 events
that have occurred on the C Controller
system along with occurrence time.
Displays the GUI screen created with
GENWARE3-VG on the general-
purpose analog RGB display connected
to the analog RGB port.
Operates the C Controller module
without battery.
: Supported : Not supported : Supported with restrictions
CPU module
Q24DHC
Q26DHC
-LS
-V -VG -LS
 


 
 


  

Reference
Q12DC
-V
Page 170,

Section 11.7
Page 171,
Section 11.7.1
Page 175,
Section 11.7.2
Page 177,
Section 11.8.1
Page 179,

Section 11.8.2
Page 183,

Section 11.8.3
Page 185,
Section 11.8.4
Page 187,
Section 11.9
Page 188,
Section 11.10
Page 190,
Section 11.11