Printing - Hitachi FL.NET User Manual

5 USER GUIDE
5.5.11

Printing

Function: The function of commands used for this purpose is to print on the printer one of the
following two pieces of information: 1) the setup information for a selected module
from the actual target machine if the FL.NET system is running in online mode; or 2)
the content (setup information) of a selected file if it is running in offline mode.
Operation: The procedure used is shown below.
(1) If the FL.NET system is running in online mode, establish a connection between the FL.NET
system and the PCs (see "5.4.4 Changing connections"). If it is running in offline mode,
choose the desired file for editing (see "5.4.5 Selecting an edition file").
(2) Choose [Main] – [Setup], or [Sub] – [Setup], from the [Module] menu. Then, the [Setup
self-node] icon (red) and [Other-node setup transmission] icon (blue) appear.
(3) Choose [Main] – [Print], or [Sub] – [Print], from the [Module] menu.
(4) The [Print] dialog box appears. In this dialog box, specify the desired printer and its
properties, and then click the OK
Figure 5-52 The [Print] Dialog Box -- an Example
button.
5-136