Hitachi FL.NET User Manual page 92

Note 1: The area 1 word count (area 2 word count) for PCs allocation is the same as the link
parameter area 1 word count (area 2 word count).
Note 2: The allocation address setting for the self-node LPU memory must not be a duplicate
of any one of those for the other nodes.
Note 3: LPU memory allocation cannot be performed over more than one PI/O range.
Example: An unacceptable setup example is given below:
When the word count (size) setting for area 1 is 3 words, "RWFF0" cannot
be specified for LPU memory allocation (because the RW area limit would
be exceeded).
Note 4: If the link parameter area 1 word count (area 2 word count) is set to "0", the area 1
address (area 2 address) for PCs allocation cannot be set.
5-37
5 USER GUIDE