Profile System Parameter Setup Area; Table 2-7 Profile System Parameter Setup Area (Description Example) - Hitachi FL.NET User Manual

2.1.5 Profile system parameter setup area

The profile system parameters for the FL.NET module can be referenced with the setup tool
named S10V FL.NET SYSTEM (for details, see "5.3 Using the FL.NET Module").
For the FL.NET module, the profile system parameters for the vendor name, manufacturer model,
and protocol version are fixed data. The FL.NET module automatically changes the FA link
status and self-node status in accordance with the communication status and other conditions.
The user can merely perform node name setting with the setup tool.

Table 2-7 Profile System Parameter Setup Area (Description example)

Item
Vendor name
Maker form
Node name (equipment name)
Protocol version
FA link status
Self-node status
Length Data
10 bytes "HITACHI"
10 bytes "LQE702"
⎯⎯⎯⎯
10 bytes
⎯⎯⎯⎯
1 byte
⎯⎯⎯⎯
1 byte
⎯⎯⎯⎯
1 byte
2-7
2 FL.NET MODULE
Description
Vendor name
Maker form/device name
User-defined node name
Fixed at 0x80.
Entering/leaving, etc.
Node number duplication detection, etc.