Inserting Dcc Blocks - Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual

5.9

Inserting DCC blocks

Before you copy the "SwayControl" DCC chart, update the DCC block library. Open a DCC
chart of your choice, e.g. "SwayControl", in the application project. Under the "Options" menu
item, select "Block types...".
Figure 5-21
Click "OK" in the popup that then appears.
Figure 5-22
The window that now opens shows the available libraries on the left-hand side with the
previously imported libraries shown on the right-hand side. Only import the most recently
available library. Do this by clicking the right arrow key.
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA
Updating block types
Popup for updating the DCC library
Configuration
5.9 Inserting DCC blocks
127