Dcc_Sccommon - Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual

Overview of the software
3.3 Sway control function blocks
3.3.1.8

DCC_SCCOMMON

Symbol
Figure 3-13
Note
You will find the naming system for crane function blocks in the SIMOCRANE Basic
Technology operating instructions [Ref. 2, Chapter 5.1].
Brief description
The function block contains basic functions and must always be included in the chart.
Method of operation
All data is grouped and the output values are calculated in this block. The block also writes and
reads the buffers for communication with the SIMOCRANE CeCOMM diagnostic program.
The last three outputs of the block are reserved for internal use and are not visible to the user.
They specify memory locations and buffer sizes for the Java communication. Their comments
must not be changed.
54
DCC_SCCOMMON
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA